The Built in Cage
The pictures above are the waterfall and pond (top
cage)
The pictures above are the  waterfall/pond  with rock and pond
foam/ 100% black silicone
Pictures above are a full view of the top half of the cage before the
floor was put in  notice the celling extends out past the walls this is
because i was going to make the cage 3 feet deep but   after gluing the
celling up decided it was  to far out and i did not want to hassle with
moving the door and window.
This is a view of the whole cage before the floor was put in
and after the floor and waterfall were put in. Look at the
corners you can see how off the walls were but this will
never be noticeable when finished
The cage with 2x3 divider to split the cage doors in half
The cage with divider in and 1 sliding window on the pond side
this is teh wall cage with the front put on and 1 window/door  
(left) on the right i will be putting a 1/4" thick sliding glass door
These are the outlet boxes one on the right side one in the front middle and
there will be one on the left
The bottom corner
of top cage  where
the electrical comes
threw
This is the
floor with the
pond in it
The bottom of the
top cage, pond,pump
cord and access hole.
This is the false floor to the
lower cage with a hole cut
out making the pond sit on it.
  
The outlet under the
bottom cage where the
cages will get there
power
the picture above is  
the waterfall im
using in the upper
cage
the picture
above is the  
drane system im
using on my
upper cage  
this is the upper cage